The First Program; Create New Project; Select Target System; Figure 24: Plc Drop-Down List - WAGO 750-880 Quickstart Reference

34 Quickstart Description
Pos : 48 /All e Seri en ( Allgemei ne Module)/Ü bers chriften für alle Serien/Inbetri ebnehmen - Konfigurier en - Parametrier en/Das erste Pr ogramm - Ü bersc hrift 2 @ 13\mod_1348220571931_21.doc @ 103163 @ 2 @ 1
3.3

The First Program

Pos : 49 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ei nlei tung/Fel dbus koppl er/-c ontroller/Einl eitender Text/Quic kstart 750-088x: Besc hreibung - Teil 2 @ 11\mod_1318404533600_21.doc @ 81133 @ 3333334433442 @ 1
Preparatory measures are required!
Please note that the steps described below require that the preparatory measures
cited previously have all been successfully performed. It is imperative that you
have installed the WAGO-I/O-PRO software and the USB cable driver, and that
there is a network connection between the PLC and PC.
3.3.1

Create New Project

1. Launch the WAGO-I/O-PRO development environment.
2. From the File > New menu, create a new project.
3.3.2

Select Target System

1. First select the PLC from the drop-down list for the target system settings.

Figure 24: PLC drop-down list

750-880, -881, -882 ETHERNET Programmable Fieldbus
WAGO-I/O-SYSTEM 750
Quickstart Reference
Version 1.0.0