Ftp Client - WAGO -I/O-SYSTEM 750 User Manual

14.6.4

FTP Client

The FTP client allows files to be loaded or written from an FTP server. The FTP
client is installed in the directory /bin and can thus be used by every user from
every directory. Port 21 is used for the FTP protocol.
FTP Client Operation
To use the FTP client, an FTP server with a known user must be available on a
remote PC for FTP access. To start the FTP client, enter the following command:
ftp <IP/hostname>
Example:
The FTP server requests the user and password. Commands can then be executed
on the server. Which commands are supported by the server is requested using
.
help
The server then provides a list of all available FTP commands. With
help <command>
a description of the command requested by the server is provided, e.g.
help cd
WAGO I/O-SYSTEM 750
I/O-IPC-C10E, CANopen Master
ftp 192.168.1.11
Linux 165