Table 12: Explanations Of The Configuration Line - WAGO -I/O-SYSTEM 750 User Manual

52 I/O-IPC Start-Up
9. Save the new settings in the bootpTabletxt file. To do this, click on "File" in
the menu and select "Save".
10. Close the editor.

Table 12: Explanations of the configuration line

Parameter
Node_1
ht=1
ha=0030DE000200
ip= 192.168.1.2
ip= 192.168.1.100
gw=192.168.1.1
Sm=255.255.255.0
Description
Name of the I/O-IPC with the I/O modules. This
can be freely chosen.
Network hardware type. For Ethernet, this is 1.
MAC address of an Ethernet interface.
IP address for an I/O-IPC located in the same
network as the host PC as well.
IP address for the gateway. For a local network,
you do not need to specify a gateway.
Subnet mask of the subnet to which the I/O-IPC
is supposed to belong.
WAGO-I/O-SYSTEM 750
I/O-IPC-C10E, CANopen Master