WAGO -I/O-SYSTEM 750 User Manual page 213

EnOcean Radio Receiver
750-642
In the input and output process image, the EnOcean radio receiver module
occupies 4 bytes of user data: 3 data bytes and 1 additional control/status byte.
However, the 3 bytes of output data are not used. Two words are assigned in the
process image via word alignment.
Input Process Image
Offset
0
1
Output Process Image
Offset
0
1
MP Bus Master Module
750-643
In both input and output process image, the MP bus master module occupies 8
bytes of user data: 6 data bytes and 2 additional control/status bytes. Four words
are assigned in the process image via word alignment.
Input and Output Process Image
Offset
0
1
2
3
WAGO I/O-SYSTEM 750
I/O-IPC-C10E, CANopen Master
Byte Designation
High Byte Low Byte
D0 S
D2 D1
Byte Designation
High Byte Low Byte
- C
- -
Byte Designation
High Byte Low Byte
C1/S1 C0/S0
D1 D0
D3 D2
D5 D4
Note
Data byte Status byte
Data bytes
Note
Not used Control byte
Not used
Note
Additional Control/status
control/status byte byte
Data bytes
I/O Modules 213