Node 1 Gbe Ethernet Port Indicators; Node 10 Gbe Ethernet Port Indicators - Quantum DXi6900 Field Service Manual

Chapter 1: Basic Operations
DXi6900 G2 Node

Node 1 GbE Ethernet Port Indicators

Each 1 GbE Ethernet port on the DXi6900 G2 Node rear panel has two LED indicators (see
below):
Link indicator
Activity Indicator
Figure 7: DXi6900 G2 Node - 1 GbE Ethernet Port LEDs
1 - Link Indicator 2 - Activity Indicator

Node 10 GbE Ethernet Port Indicators

Depending on the configuration, Quantum DXi6900 G2 systems include a 10 GbE adapter card (dual optical
or Twinax ports).
The 10 GbE adapter with dual optical or Twinax ports has two LED indicators for each 10 GbE port (see
Figure 8 on the next page):
Link indicator
Activity Indicator
Quantum DXi6900 G2 Field Service Manual
Off - Indicates the port is not connected to the network.
l
Green - Indicates the port is connected to the network at maximum speed (1Gbps).
l
Amber - Indicates the port is connected to the network at less than its maximum port
l
speed.
Blinking green - Indicates network data is being sent or received.
Off - Indicates the port is not connected to the network.
l
Green - Indicates the port is connected to the network at 10Gbps speed.
l
Yellow - Indicates the port is connected to the network at 1 Gbps speed.
l
Blinking - Indicates network data is being sent or received.
l
Figure 7
11