Configurations - Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual

Proline Prosonic Flow B 200 HART
Endress+Hauser
Diagnostic Short text
number
841 Sensor range
842 Process limit
881 Sensor signal path 1 to
2
882 Input signal
930 Process fluid
931 Process fluid
1) Diagnostic behavior can be changed.
12.6 Pending diagnostic events
The Diagnostics menu allows the user to view the current diagnostic event and the
previous diagnostic event separately.
To call up the measures to rectify a diagnostic event:
• Via local display →  109
• Via "FieldCare" operating tool →  111
Other pending diagnostic events can be displayed in the Diagnostic list submenu
→  116
Navigation
"Diagnostics" menu
Structure of the submenu
Diagnostics
Diagnostics and troubleshooting
Remedy instructions
Check flow velocity
Low flow cut off active!
1. Check low flow cut off
configuration
1. Check process conditions
2. Clean transducer
3. Change transducer
1. Check input configuration
2. Check external device or process
conditions
Sound velocity too high! Check process
conditions
Sound velocity too low! Check process
conditions
→
Actual diagnostics
Previous diagnostics
Operating time from restart
Operating time
Status Diagnostic
signal behavior
[from the [from the
factory] factory]
1)
S Warning
S Warning
1)
M Warning
F Alarm
S Warning
S Warning
115