Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual page 59

Proline Prosonic Flow B 200 HART
Parameter
Device tag
Endress+Hauser
Parameter overview with brief description
Description
Enter the name for the measuring point.
10.4.2 Setting the system units
In the System units submenu the units of all the measured values can be set.
Navigation
"Setup" menu → Advanced setup → System units
‣
System units
Volume flow unit
Volume unit
Corrected volume flow unit
Corrected volume unit
Mass flow unit
Mass unit
Temperature unit
Pressure unit
Energy flow unit
Energy unit
Calorific value unit
Velocity unit
User entry
Max. 32 characters such as
letters, numbers or special
characters (e.g. @, %, /).
Commissioning
Factory setting
Prosonic Flow
59