For The Transmitter - Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual

Proline Prosonic Flow B 200 HART
Endress+Hauser
15 Accessories
Various accessories, which can be ordered with the device or subsequently from Endress
+Hauser, are available for the device. Detailed information on the order code in question is
available from your local Endress+Hauser sales center or on the product page of the
Endress+Hauser website: www.endress.com.
15.1 Device-specific accessories
15.1.1

For the transmitter

Accessories Description
Prosonic Flow 200 Transmitter for replacement or storage. Use the order code to define the following
transmitter specifications:
• Approvals
• Output
• Display / operation
• Housing
• Software

Remote display FHX50 housing to accommodate a display module →  145.
FHX50
• FHX50 housing suitable for:
• Housing material:
• Length of connecting cable: up to max. 60 m (196 ft)
The measuring device can be ordered with the FHX50 housing and a display
module. The following options must be selected in the separate order codes:
• Order code for measuring device, feature 030:
• Order code for FHX50 housing, feature 050 (device version):
• Order code for FHX50 housing, depends on the desired display module in feature
The FHX50 housing can also be ordered as a retrofit kit. The measuring device
display module is used in the FHX50 housing. The following options must be
selected in the order code for the FHX50 housing:
• Feature 050 (measuring device version): option B "Not prepared for FHX50
• Feature 020 (display, operation): option A "None, existing displayed used"

Overvoltage protection for Ideally, the overvoltage protection module should be ordered directly with the
2-wire devices device. See product structure, characteristic 610 "Accessory mounted", option NA
"Overvoltage protection". Separate order necessary only if retrofitting.
• OVP10: For 1-channel devices (characteristic 020, option A):
• OVP20: For 2-channel devices (characteristic 020, options B, C, E or G)

Weather protection cover Is used to protect the measuring device from the effects of the weather: e.g.
rainwater, excess heating from direct sunlight or extreme cold in winter.

For details, see Installation Instructions EA00104D
– SD02 display module (push buttons)
– SD03 display module (touch control)
– Plastic PBT
– Stainless steel CF-3M (316L, 1.4404)
(cable lengths available for order: 5 m (16 ft), 10 m (32 ft), 20 m (65 ft),
30 m (98 ft))
Option L or M "Prepared for FHX50 display"
Option A "Prepared for FHX50 display"
020 (display, operation):
– Option C: for an SD02 display module (push buttons)
– Option E: for an SD03 display module (touch control)
display"
For details, see Special Documentation SD01007F
For details, see Special Documentation SD01090F.
For details, see Special Documentation SD00333F
Accessories
127