Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual page 101

Ultrasonic transit time flowmeter
Hide thumbs Also See for Proline Prosonic Flow B 200:
Table of Contents

Advertisement

Proline Prosonic Flow B 200 HART
Parameter
Output current 1
Measured current 1
Terminal voltage 1
Output current 2
Pulse output
Output frequency
Switch status
Endress+Hauser
Output frequency
Switch status
Parameter overview with brief description
Prerequsite
The Pulse option is selected in the
Operating mode parameter.
The Frequency option is selected in the
Operating mode parameter.
The Switch option is selected in the
Operating mode parameter.
11.4
Adapting the measuring device to the process
conditions
The following are available for this purpose:
• Basic settings using the Setup menu
→  58
• Advanced settings using the Advanced setup submenu →  84
11.5
Performing a totalizer reset
In the Operation submenu the totalizers are reset:
• Control Totalizer
• Reset all totalizers
Function scope of the "Control Totalizer " parameter
Options
Description
Totalize
The totalizer is started.
Reset + hold
The totaling process is stopped and the totalizer is reset to 0.
Preset + hold
The totaling process is stopped and the totalizer is set to its defined start value
from the Preset value parameter.
Reset + totalize
The totalizer is reset to 0 and the totaling process is restarted.
Preset + totalize
The totalizer is set to the defined start value in the Preset value parameterand the
totaling process is restarted.
Hold
The totaling process is stopped.
Description
Displays the current value currently
calculated for the current output.
Displays the current value currently
measured for the current output.
Displays the current terminal voltage
that is applied at the current output.
Displays the current value currently
calculated for the current output.
Displays the pulse frequency currently
output.
Displays the value currently measured
for the frequency output.
Displays the current switch output
status.
Operation
User interface
3.59 to 22.5 mA
0 to 30 mA
0.0 to 50.0 V
3.59 to 22.5 mA
Positive floating-point
number
0 to 1 250 Hz
• Open
• Closed
101

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents