Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual page 78

Commissioning
Parameter
Assign limit
Assign flow direction check
Assign status
Switch-on value
Switch-off value
Switch-on delay
Switch-off delay
Failure mode
Invert output signal
* Visibility depends on order options or device settings
78
Prerequsite
In the Switch output function
parameter the Limit option is
selected.
The Flow direction check
option is selected in the Switch
output function parameter.
The Status option is selected
in the Switch output function
parameter.
In the Switch output function
parameter the Limit option is
selected.
In the Switch output function
parameter the Limit option is
selected.
The Limit option is selected in
the Switch output function
parameter.
The Limit option is selected in
the Switch output function
parameter.
–
–
10.4.7 Configuring the local display
The Display wizard guides you systematically through all the parameters that can
configured for configuring the local display.
Description
Select process variable for limit
function.
Select process variable for flow
direction monitoring.
Select device status for switch
output.
Enter measured value for the
switch-on point.
Enter measured value for the
switch-off point.
Define delay for the switch-on
of status output.
Define delay for the switch-off
of status output.
Define output behavior in
alarm condition.
Invert the output signal.
Proline Prosonic Flow B 200 HART
Selection / User Factory setting
entry
• Volume flow Volume flow
• Corrected volume
flow
• Corrected methane
*
volume flow
• Mass flow
*
• Energy flow
*
• Methane fraction
*
• Wobbe index
*
• Calorific value
*
• Temperature
• Totalizer 1
• Totalizer 2
• Totalizer 3
• Sound velocity
• Flow velocity
*
• Acceptance rate
*
• Signal asymmetry
*
• Turbulence
*
• Signal strength
• Signal to noise
*
ratio
• Off Volume flow
• Volume flow
• Corrected volume
flow
• Corrected methane
volume flow
• Mass flow
• Energy flow
Low flow cut off Low flow cut off
Signed floating-point Country-specific:
number • 0 m³/h
• 0 ft³/h
Signed floating-point Country-specific:
number • 0 m³/h
• 0 ft³/h
0.0 to 100.0 s 0.0 s
0.0 to 100.0 s 0.0 s
• Actual status Open
• Open
• Closed
• No No
• Yes
Endress+Hauser