Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual page 102

Operation
Parameter
Control Totalizer
Preset value
Reset all totalizers
* Visibility depends on order options or device settings
102
Function scope of the "Reset all totalizers" parameter
Options Description
Reset + totalize Resets all totalizers to 0 and restarts the totaling process. This deletes all the flow
values previously totalized.
Navigation
"Operation" menu → Operation
‣
Totalizer handling
Control Totalizer 1 to 3
Preset value 1 to 3
Reset all totalizers
Parameter overview with brief description
Prerequsite
One of the following options is
selected in the Assign process
variable parameter (→  85)
of the Totalizer 1 to 3
submenu:
• Volume flow
• Corrected volume flow
• Corrected methane volume
*
flow
• Mass flow
*
• Energy flow
One of the following options is
selected in the Assign process
variable parameter (→  85)
of the Totalizer 1 to 3
submenu:
• Volume flow
• Corrected volume flow
• Corrected methane volume
*
flow
• Mass flow
*
• Energy flow
–
11.6 Showing data logging
The Extended HistoROM application package must be enabled in the device (order
option) for the Data logging submenu to appear. This contains all the parameters for the
measured value history.
The measured value history is also accessible via the FieldCare plant asset
management tool →  49.
Description
Control totalizer value.
Specify start value for totalizer.
Dependency

The unit of the selected
process variable is
specified for the totalizer
in the Unit totalizer
parameter (→  85).
Reset all totalizers to 0 and
start.
Proline Prosonic Flow B 200 HART
Selection / User Factory setting
entry
• Totalize Totalize
• Reset + hold
• Preset + hold
• Reset + totalize
• Preset + totalize
• Hold
Signed floating-point Country-specific:
number • 0 m³
• 0 ft³
• Cancel Cancel
• Reset + totalize
Endress+Hauser