Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual page 69

Proline Prosonic Flow B 200 HART
Parameter
Operating mode
Assign pulse output
Endress+Hauser
Configuring the pulse output
Navigation
"Setup" menu → Pulse/frequency/switch output
Structure of the wizard for the pulse output
Off
Mass flow
 20 "Pulse/frequency/switch output" wizard in the "Setup" menu: "Operating mode" parameter"Pulse" option
Parameter overview with brief description
Prerequsite
–
In the Operating mode
parameter the Pulse option is
selected.
Operating mode
Pulse
Assign pulse
Volume flow Correct.vol.flow
Value per pulse
Pulse width
Failure mode
Invert outp.sig.
End of wizard
Description
Define the output as a pulse,
frequency or switch output.
Select process variable for
pulse output.
Commissioning
Corr CH4
Energy flow
volflow
Ref. comb. temp.
Corr. vol.flow.
Cal.value calc.
Selection / User Factory setting
entry
• Pulse Pulse
• Frequency
• Switch
• Off Off
• Volume flow
• Corrected volume
flow
• Corrected methane
*
volume flow
• Mass flow
*
• Energy flow
A0019210-EN
69