Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual page 85

Proline Prosonic Flow B 200 HART
Parameter
Assign process variable
Unit totalizer
Endress+Hauser
10.5.1 Configuring the totalizer
In the "Totalizer 1 to 3" submenu the individual totalizer can be configured.
Navigation
"Setup" menu → Advanced setup → Totalizer 1 to 3
‣
Totalizer 1 to 3
Assign process variable
Unit totalizer
Totalizer operation mode
Failure mode
Parameter overview with brief description
Prerequsite
–
One of the following options is
selected in the Assign process
variable parameter (→  85)
of the Totalizer 1 to 3
submenu:
• Volume flow
• Corrected volume flow
• Corrected methane volume
*
flow
• Mass flow
*
• Energy flow
Description
Select process variable for
totalizer.
Select process variable totalizer
unit.
Commissioning
Selection Factory setting
• Off Volume flow
• Volume flow
• Corrected volume
flow
• Corrected methane
*
volume flow
• Mass flow
*
• Energy flow
• Off
• Volume flow
• Corrected volume
flow
• Corrected methane
volume flow
• Mass flow
• Energy flow
Unit choose list Country-specific:
• m³
• ft³
85