Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual page 82

Commissioning
Parameter
Measuring mode output 2
Measuring mode output 2
82
Prerequsite
–
–
10.4.9 Configuring the low flow cut off
The Low flow cut off wizard guides you systematically through all the parameters that
have to be set for configuring the low flow cut off.
Structure of the wizard
Off Volume flow
 27 "Low flow cutoff" wizard in the "Setup" menu
Navigation
"Setup" menu → Low flow cut off
‣
Low flow cut off
Assign process variable
On value low flow cutoff
Off value low flow cutoff
Description
Select measuring mode for
output.
Select measuring mode for
output.
Assign variable
Correct.vol.flow Corr CH4 volflow
On value
Off value
End of wizard
Proline Prosonic Flow B 200 HART
User entry / Factory setting
Selection
• Forward flow Forward flow
• Forward/Reverse
flow
• Reverse flow
• Reverse flow
compensation
• Forward flow Forward flow
• Forward/Reverse
flow
• Reverse flow
• Reverse flow
compensation
Mass flow Energy flow
Endress+Hauser
A0015995-EN