Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual page 110

Diagnostics and troubleshooting
110
12.3 Diagnostic information in FieldCare
12.3.1 Diagnostic options
Any faults detected by the measuring device are displayed on the home page of the
operating tool once the connection has been established.
1 Status area with status signal
2 Diagnostic information →  108
3 Remedial measures with Service ID
Furthermore, diagnostic events that have occurred can be viewed in the Diagnostics
menu:
• Via parameters →  115
• Via submenu →  116
Diagnostic information
The fault can be identified using the diagnostic information. The short text helps you by
providing information about the fault. In addition, the corresponding symbol for the
diagnostic behavior is displayed in front of the diagnostic information on the local display.
Diagnostic
behavior
Example
Diagnostic information
Diagnostic code
Status signal
↓
A0013962 A0013958
NAMUR 3-digit number
NE 107
Proline Prosonic Flow B 200 HART
Diagnostic
Short text
number
↓ ↓
441 Curr.output 1
Endress+Hauser