Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual page 65

Proline Prosonic Flow B 200 HART
Endress+Hauser
10.4.5 Configuring the current output
The "Current output 1 to 2" wizard guides you systematically through all the parameters
that have to be set for configuring the specific current output.
Navigation
"Setup" menu → Current output 1 to 2
Structure of the wizard
Volume flow
Off*
4...20 mA
NAMUR
Min.
 18 "Current output 1 to 2" wizard in the "Setup" menu (part 1)
Off* = Option only for current output 2
Assign curr.
Corr CH4 volflow
Correct.vol.flow
Ref. conditions
Current span
4...20 mA US 4...20 mA
4 mA value
20 mA value
Failure mode
... Defined value
Failure current
End of wizard
Commissioning
Mass flow
Fixed current
A0015986-EN
65