Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual page 44

Operation options
44
The direct access code consists of a 4-digit number and the channel number, which
identifies the channel of a process variable: e.g. 0914-1. In the navigation view, this
appears on the right-hand side in the header of the selected parameter.
1 Direct access code
Note the following when entering the direct access code:
• The leading zeros in the direct access code do not have to be entered.
Example: Input of "914" instead of "0914"
• If no channel number is entered, channel 1 is jumped to automatically.
Example: Input of "0914" → Parameter Totalizer 1
• If a different channel is jumped to: Enter the direct access code with the corresponding
channel number.
Example: Input of "0914-2" → Parameter Totalizer 2
8.3.8 Calling up help text
For some parameters, help texts exist, which the user can call up from the navigation view.
These briefly describe the function of the parameter and thus support fast and reliable
commissioning.
Calling up and closing the help text
The user is in the navigation view and the selection bar is on a parameter.
1. Press  for 2 s.
 The help text for the selected parameter opens.
 13 Example: Help text for parameter "Enter access code"
2. Press  +  simultaneously.
 The help text is closed.
Proline Prosonic Flow B 200 HART
0914-2
Ent. access code
Enter access code to disable
write protec.
1
A0017223
A0014002-EN
Endress+Hauser