Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual page 70

Commissioning
Parameter
Value per pulse
Pulse width
Failure mode
Invert output signal
* Visibility depends on order options or device settings
70
Prerequsite
One of the following options is
selected in the Assign pulse
output parameter (→  69):
• Volume flow
• Corrected volume flow
• Corrected methane volume
*
flow
• Mass flow
*
• Energy flow
One of the following options is
selected in the Assign pulse
output parameter (→  69):
• Volume flow
• Corrected volume flow
• Corrected methane volume
*
flow
• Mass flow
*
• Energy flow
One of the following options is
selected in the Assign pulse
output parameter (→  69):
• Volume flow
• Corrected volume flow
• Corrected methane volume
*
flow
• Mass flow
*
• Energy flow
–
Description
Enter measured value at which
a pulse is output.
Define time width of the
output pulse.
Define output behavior in
alarm condition.
Invert the output signal.
Proline Prosonic Flow B 200 HART
Selection / User Factory setting
entry
Signed floating-point Depends on country
number and nominal
diameter
5 to 2 000 ms 100 ms
• Actual value No pulses
• No pulses
• No No
• Yes
Endress+Hauser