Configuration Commands - AudioCodes MP-11x User Manual

User's Manual
5.7

Configuration Commands

The commands under the CONFiguration directory query and modify the current device
configuration. The following commands are available:
Command
SetConfigParam IP
RestoreFactorySettings /conf/rfs
SaveAndRestart
ConfigFile
Version 6.6
Configuration CLI Commands
Short Arguments
Format
/conf/scp ip ip-addr subnet def-
gw
/conf/sar
/conf/cf view | get | set
85
5. CLI-Based Management
Description
Sets the IP address, subnet mask,
and default gateway address of the
device (on-the-fly).
Note: This command may cause
disruption of service. The CLI session
may disconnect since the device
changes its IP address.
Restores all parameters to factory
settings.
Saves all current configurations to the
non-volatile memory and resets the
device.
Retrieves the full ini file from the
device and allows loading a new ini
file directly in the CLI session.
Note: The argument view displays the
file, page by page. The argument get
displays the file without breaks.
MP-11x & MP-124