AudioCodes MP-11x User Manual page 599

User's Manual
Parameter
[RPRequired]
Multiple Differentiated Services Code Points (DSCP) per MLPP Call Priority Level (Precedence)
Parameters
The MLPP service allows placement of priority calls, where properly validated users can preempt
(terminate) lower-priority phone calls with higher-priority calls. For each MLPP call priority level, the
DSCP can be set to a value from 0 to 63. The Resource Priority value in the Resource-Priority SIP
header can be one of the following:
MLPP Precedence Level
0 (lowest)
2
4
6
8
9 (highest)
Web/EMS: RTP DSCP for MLPP
Routine
[MLPPRoutineRTPDSCP]
Web/EMS: RTP DSCP for MLPP
Priority
[MLPPPriorityRTPDSCP]
Web/EMS: RTP DSCP for MLPP
Immediate
[MLPPImmediateRTPDSCP]
Web/EMS: RTP DSCP for MLPP
Flash
[MLPPFlashRTPDSCP]
Web/EMS: RTP DSCP for MLPP
Flash Override
Version 6.6
Determines whether the SIP resource-priority tag is added in the
SIP Require header of the INVITE message for Tel-to-IP calls.

[0] Disable = Excludes the SIP resource-priority tag from the
SIP Require header.

[1] Enable = (Default) Adds the SIP resource-priority tag in
the SIP Require header.
Note: This parameter is applicable only to MLPP priority call
handling (i.e., only when the CallPriorityMode parameter is set to
1).
Precedence Level in Resource-Priority SIP Header
routine
priority
immediate
flash
flash-override
flash-override-override
Defines the RTP DSCP for MLPP Routine precedence call level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global
parameter PremiumServiceClassMediaDiffServ or as defined in
IP Profiles per call.
Defines the RTP DSCP for MLPP Priority precedence call level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global
parameter PremiumServiceClassMediaDiffServ or as defined in
IP Profiles per call.
Defines the RTP DSCP for MLPP Immediate precedence call
level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global
parameter PremiumServiceClassMediaDiffServ or as defined in
IP Profiles per call.
Defines the RTP DSCP for MLPP Flash precedence call level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global
parameter PremiumServiceClassMediaDiffServ or as defined in
IP Profiles per call.
Defines the RTP DSCP for MLPP Flash-Override precedence
call level.
599
44. Configuration Parameters Reference
Description
MP-11x & MP-124