AudioCodes MP-11x User Manual page 191

User's Manual
3. Click the Add button; the following dialog box appears:
Figure 14-12: Quality of Experience Page - Add Record Dialog Box
The figure above shows value thresholds for the MOS parameter, which are assigned
using pre-configured values of the Low Sensitivity profile. In this example setting, if the
MOS value changes by 0.1 (hysteresis) to 3.3 or 3.5, the device sends a report to the
SEM indicating this change. If the value changes to 3.3, it sends a yellow state (i.e.,
medium quality); if the value changes to 3.5, it sends a green state.
4. Configure the parameters as required. See the table below for a description of each
parameter.
5. Click Submit to apply your settings.
Table 14-2: Quality of Experience Parameter Descriptions
Parameter
Index
[QOERules_RuleIndex]
Monitored Parameter
[QOERules_MonitoredParam]
Direction
[QOERules_Direction]
Version 6.6
Defines the table index entry. Up to four table row entries can be
configured per Media Realm.
Defines the parameter to monitor and report.

[0] MOS (default)

[1] Delay

[2] Packet Loss

[3] Jitter

[4] RERL
Defines the monitoring direction.

[0] Device Side (default)

[1] Remote Side
191
Description
MP-11x & MP-124
14. Media