AudioCodes MP-11x User Manual page 308

Parameter
Gateway Port
[CallerDisplayInfo_Port]
Caller ID/Name
[CallerDisplayInfo_DisplayString]
Presentation
[CallerDisplayInfo_IsCidRestricted]
User's Manual
Table 26-4: Caller Display Parameter Description
Displays the port.
Defines the Caller ID string.
The valid value is a string of up to 18 characters.
Enables the sending of the caller ID string.

[0] Allowed = The caller ID string is sent when a Tel-to-IP
call is made.

[1] Restricted = The caller ID string is not sent.
Notes:

This parameter is overridden by the 'Presentation'
parameter in the Source Number Manipulation table (see
'Configuring Source/Destination Number Manipulation' on
page 241).

If this parameter is set to Restricted, the Caller ID is sent
to the remote side using only the SIP P-Asserted-Identity
and P-Preferred-Identity headers (AssertedIdMode).
Description
308
MP-11x & MP-124
Document #: LTRT-65432