Viewing Ip Connectivity - AudioCodes MP-11x User Manual

User's Manual
37.8

Viewing IP Connectivity

The IP Connectivity page displays on-line, read-only network diagnostic connectivity
information on all destination IP addresses configured in the Tel to IP Routing page (see
'Configuring Tel to IP Routing' on page 256).
Note:
is reset if two minutes elapse without a call to that destination.

To view IP connectivity information:
1. In the Routing General Parameters page, set the 'Enable Alt Routing Tel to IP'
parameter (AltRoutingTel2IPMode) to Enable or Status Only (see 'Configuring
General Routing Parameters' on page 255).
2. Open the IP Connectivity page (Status & Diagnostics tab > VoIP Status menu > IP
Connectivity).
Column Name
IP Address
Host Name
Connectivity
Method
Version 6.6
The information in columns 'Quality Status' and 'Quality Info' (per IP address)
Figure 37-7: IP Connectivity Page
Table 37-4: IP Connectivity Parameters
The IP address can be one of the following:

IP address defined as the destination IP address in the Tel to IP Routing.

IP address resolved from the host name defined as the destination IP
address in the Tel to IP Routing.
Host name (or IP address) as defined in the Tel to IP Routing.
The method according to which the destination IP address is queried
periodically (ICMP ping or SIP OPTIONS request).
Description
421
37. VoIP Status
MP-11x & MP-124