AudioCodes MP-11x User Manual page 215

Mediapack series analog voip gateways
Hide thumbs Also See for MP-11x:
Table of Contents

Advertisement

User's Manual
Parameter
Host Name
[Account_HostName]
Register
[Account_Register]
Contact User
[Account_ContactUser]
Application Type
[Account_ApplicationType]
Version 6.6
Defines the Address of Record (AOR) host name. It appears in
REGISTER From/To headers as ContactUser@HostName. For
successful registrations, this host name is also included in the
INVITE request's From header URI.
This parameter can be up to 49 characters.
Note: If this parameter is not configured or if registration fails, the
'SIP Group Name' parameter configured in the IP Group table is
used instead.
Enables registration.
[0] No (Default)
[1] Yes
When enabled, the device sends REGISTER requests to the Serving
IP Group. The host name (i.e., host name in SIP From/To headers)
and Contact User (user in From/To and Contact headers) are taken
from this table upon successful registration. See the example below:
REGISTER sip:xyz SIP/2.0
Via: SIP/2.0/UDP
10.33.37.78;branch=z9hG4bKac1397582418
From:
<sip:ContactUser@HostName>;tag=1c1397576231
To: <sip: ContactUser@HostName >
Call-ID: 1397568957261200022256@10.33.37.78
CSeq: 1 REGISTER
Contact:
<sip:ContactUser@10.33.37.78>;expires=3600
Expires: 3600
User-Agent: Sip-Gateway/v.6.00A.008.002
Content-Length: 0
Notes:
To activate registration, you also need to set the parameter
'Registration Mode' to 'Per Account' in the Hunt Group Settings
table for the specific Hunt Group.
The Hunt Group account registration is not affected by the
parameter IsRegisterNeeded.
Defines the AOR user name. This appears in REGISTER From/To
headers as ContactUser@HostName, and in INVITE/200 OK
Contact headers as ContactUser@<device's IP address>.
Notes:
If this parameter is not configured, the 'Contact User' parameter
in the IP Group table is used instead.
If registration fails, then the user part in the INVITE Contact
header contains the source party number.
Defines the application type:
[0] GW/IP2IP = (Default) Gateway application.
215
Description
18. SIP Definitions
MP-11x & MP-124

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediapack mp-124

Table of Contents