User's Manual
•
Test Call table configuration at Device A:
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
•
Test Call table configuration at Device B:
♦
♦
♦
Registration Test Call Scenario: This example describes the configuration for testing
the registration and authentication (i.e., username and password) process of a
simulated test endpoint on the device with an external proxy/registrar server. This is
useful, for example, for verifying that endpoints located in the LAN can register with an
external proxy and subsequently, communicate with one another.
Version 6.6
Figure 42-6: Batch Test Call Example
Endpoint URI: "101"
Called URI: "201"
Route By: Dest Address
Destination Address: "10.13.4.12"
Call Party: Caller
Maximum Channels for Session: "3" (this setting configures three endpoints -
"101", "102" and "103)
Call Duration: "5" (seconds)
Calls per Sec: "1"
Test Mode: Continuous
Test Duration: "3" (minutes)
Schedule Interval: "180" (minutes)
Endpoint URI: "201"
Call Party: Caller
Maximum Channels for Session: "3" (this setting configures three endpoints -
"201", "202" and "203)
469
42. Testing SIP Signaling Calls
MP-11x & MP-124