AudioCodes MP-11x User Manual page 189

User's Manual
Parameter
Media Realm Name
[CpMediaRealm_MediaRealm
Name]
IPv4 Interface Name
[CpMediaRealm_IPv4IF]
IPv6 Interface Name
[CpMediaRealm_IPv6IF]
Port Range Start
[CpMediaRealm_PortRangeSt
art]
Number of Media Session Legs
[CpMediaRealm_MediaSessio
nLeg]
Port Range End
[CpMediaRealm_PortRangeE
nd]
Is Default
[CpMediaRealm_IsDefault]
Version 6.6
Defines an arbitrary, identifiable name for the Media Realm.
The valid value is a string of up to 40 characters.
Notes:

This parameter is mandatory.

The name assigned to the Media Realm must be unique.

This Media Realm name is used in the IP Groups table.
Assigns an IPv4 interface to the Media Realm. This is name of the
interface as configured for the Interface Name field in the Multiple
Interface table.
Assigns an IPv6 interface to the Media Realm. This is name of the
interface as configured for the Interface Name field in the Multiple
Interface table.
Defines the starting port for the range of Media interface UDP
ports.
Notes:

You must either configure all media realms with port ranges or
all without; not some with and some without.

The available UDP port range is calculated using the
BaseUDPport parameter:

BaseUDPport to BaseUDPport + 4030*10

Port ranges over 60,000 must not be used.
Defines the number of media sessions associated with the range of
ports. This is the number of media sessions available in the port
range. For example, 100 ports correspond to 10 media sessions,
since ports are allocated in chunks of 10.
Read-only field displaying the ending port for the range of Media
interface UDP ports. This field is calculated by adding the 'Media
Session Leg' field (multiplied by the port chunk size) to the 'Port
Range Start' field. A value appears once a row has been
successfully added to the table.
Defines the Media Realm as the default Media Realm. This default
Media Realm is used when no Media Realm is configured for an IP
Group for a specific call.

[0] No (default)

[1] Yes
Notes:

This parameter can be set to Yes for only one defined Media
Realm.

If this parameter is not configured, then the first Media Realm in
the table is used as the default.

If the table is not configured, then the default Media Realm
includes all the configured media interfaces.
189
Description
MP-11x & MP-124
14. Media