Control Network Parameters; Ip Group, Proxy, Registration And Authentication Parameters - AudioCodes MP-11x User Manual

Parameter
Web: Interface Name
[QOEInterfaceName]
Media Realm > Quality of Experience Table
Web: Media Realm >
Quality Of Experience
EMS: Media > Media
Realm > Voice Quality
Rules
[QOERules]
44.7

Control Network Parameters

44.7.1 IP Group, Proxy, Registration and Authentication Parameters

The proxy server, registration and authentication SIP parameters are described in the table
below.
Table 44-31: Proxy, Registration and Authentication SIP Parameters
Parameter
IP Group Table
Web: IP Group Table
EMS: Endpoints > IP Group
[IPGroup]
User's Manual
Defines the IP network interface on which the quality experience reports
are sent.
The default is the OAMP interface.
Note: For this parameter to take effect, a device reset is required.
This table configures Quality of Experience parameters per Media
Realm.
[ QOERules ]
ORMAT QOERules_Index = QOERules_MediaRealmIndex,
QOERules_RuleIndex, QOERules_MonitoredParam,
QOERules_Direction, QOERules_Profile,
QOERules_GreenYellowThreshold, QOERules_GreenYellowHysteresis,
QOERules_YellowRedThreshold, QOERules_YellowRedHysteresis,
QOERules_GreenYellowOperation,
QOERules_GreenYellowOperationDetails,
QOERules_YellowRedOperation,
QOERules_YellowRedOperationDetails;
[ \QOERules ]
Note: For a detailed description of this table, see Configuring Quality of
Experience Parameters per Media Realm on page 190.
This table configures IP Groups.
The ini file format of this parameter is as follows:
[IPGroup]
FORMAT IPGroup_Index = IPGroup_Type,
IPGroup_Description, IPGroup_ProxySetId,
IPGroup_SIPGroupName, IPGroup_ContactUser,
IPGroup_EnableSurvivability, IPGroup_ServingIPGroup,
IPGroup_SipReRoutingMode,
IPGroup_AlwaysUseRouteTable, IPGroup_RoutingMode,
IPGroup_SRD, IPGroup_MediaRealm,
IPGroup_ClassifyByProxySet, IPGroup_ProfileId,
IPGroup_MaxNumOfRegUsers, IPGroup_InboundManSet,
IPGroup_OutboundManSet, IPGroup_RegistrationMode,
IPGroup_AuthenticationMode, IPGroup_MethodList,
IPGroup_EnableSBCClientForking, IPGroup_SourceUriInput,
IPGroup_DestUriInput, IPGroup_ContactName;
[/IPGroup]
Notes:

For this parameter to take effect, a device reset is required.
518
Description
Description
Document #: LTRT-65432
MP-11x & MP-124