Release Reasons In Cdr - AudioCodes MP-11x User Manual

Mediapack series analog voip gateways
Hide thumbs Also See for MP-11x:
Table of Contents

Advertisement

Field Name
SigTransportType
TxRTPIPDiffServ
TxSigIPDiffServ
LocalRFactor
RemoteRFactor
LocalMosCQ
RemoteMosCQ
SigSourcePort
SigDestPort
MediaType
SIPTrmReason
SipTermDesc
PstnTermReason
LatchedRtpIp
LatchedRtpPort

38.2.2.2 Release Reasons in CDR

The possible reasons for call termination for the Gateway / IP-to-IP application which is
represented in the CDR field TrmReason are listed below:
"REASON N/A"
"RELEASE_BECAUSE_NORMAL_CALL_DROP"
"RELEASE_BECAUSE_DESTINATION_UNREACHABLE"
"RELEASE_BECAUSE_DESTINATION_BUSY"
"RELEASE_BECAUSE_NOANSWER"
"RELEASE_BECAUSE_UNKNOWN_REASON"
"RELEASE_BECAUSE_REMOTE_CANCEL_CALL"
"RELEASE_BECAUSE_UNMATCHED_CAPABILITIES"
"RELEASE_BECAUSE_UNMATCHED_CREDENTIALS"
"RELEASE_BECAUSE_UNABLE_TO_HANDLE_REMOTE_REQUEST"
"RELEASE_BECAUSE_NO_CONFERENCE_RESOURCES_LEFT"
User's Manual
SIP signaling transport type (UDP, TCP, or TLS)
Media IP DiffServ
Signaling IP DiffServ
Local R-factor
Remote R-factor
Local MOS for conversation quality
Remote MOS for conversation quality
SIP source port
SIP destination port
Media type - audio, video, or text
SIP call termination reason (BYE, CANCEL, or SIP error codes, e.g., 404)
Description of SIP termination reason:
SIP Reason header, if exists, for example: SIP ;cause=200 ;text="Call
completed elsewhere".
If no SIP Reason header exists, the description is taken from the
reason text, if exists, of the SIP response code, for example: "417
Unknown Resource-Priority".
If no reason text exists in the SIP response code, the description is
taken from an internal SIP response mapping mechanism. For
example, if the device receives a SIP response "422", it sends in the
CDR "422 Session Interval Too Small method" as the description.
Q.850 protocol termination reason (0-127).
Remote IP address of the incoming RTP stream that the device "latched"
on to as a result of the RTP latching mechanism for NAT traversal.
Remote RTP port of the incoming RTP stream that the device "latched"
on to as a result of the RTP latching mechanism for NAT traversal.
432
Description
Document #: LTRT-65432
MP-11x & MP-124

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediapack mp-124

Table of Contents