Enabling The User Info Table; Software License Key - AudioCodes MP-11x User Manual

User's Manual
An example of a configured User Info file is shown below:
[ GW ]
FORMAT
PBXExtensionNum,GlobalPhoneNum,DisplayName,UserName,Password
401,638001,Mike,miked,1234
402,638002,Lee,leep,4321
403,638003,Sue,suer,8790
404,638004,John,johnd,7694
405,638005,Pam,pame,3928
406,638006,Steve,steveg,1119
407,638007,Fred,frede,8142
408,638008,Maggie,maggiea,9807

32.1.4.2 Enabling the User Info Table

The procedure below describes how to load a User Info file to the device and enable the
use of the User Info table:

To enable the User Info table:
1. Open the Advanced Parameters page (Configuration tab > VoIP menu > SIP
Definitions > Advanced Parameters).
2. Set the 'Enable User-Information Usage' parameter to Enable.
32.2

Software License Key

The device is shipped with a pre-installed Software License Key, which determines the
device's supported features, capabilities, and available resources. You can upgrade or
change your device's supported features by purchasing and installing a new Software
License Key to match your requirements.
Note:
License Key.
Version 6.6
The availability of certain Web pages depends on the installed Software
381
32. Software Upgrade
MP-11x & MP-124