Voip Interface Per Application Type - AudioCodes MP-11x User Manual

12.2.4.2 VoIP Interface per Application Type

This example describes the configuration of three VoIP interfaces; one for each application
type:
1. Multiple Interface table: Configured with three interfaces, each for a different
application type, i.e., one for OAMP, one for Call Control, and one for RTP Media, and
each with a different VLAN ID and default gateway:
Table 12-4: Example of VoIP Interfaces per Application Type in Multiple Interface Table
Application
Index
Type
0 OAMP
1 Control
2 Media
2. VLANs are required and the Native VLAN ID is the same VLAN ID as the
Management interface (configured for Index 0):
•
'VLAN Mode' is set to Enable.
•
'Native VLAN ID' field is set to "1".
3. IP Routing table: A routing rule is required to allow remote management from a host
in 176.85.49.0 / 24:
Destination IP
Address
176.85.49.0
4. All other parameters are set to their respective default values. The NTP application
remains with its default application types.
User's Manual
Prefix
IP Address
Length
192.168.85.14 16
200.200.85.14 24
211.211.85.14 24
Table 12-5: Example IP Routing Table
Prefix Length
24
132
VLAN
Gateway
0.0.0.0
200.200.85.1
211.211.85.1
Gateway IP
Metric
Address
192.168.0.1
MP-11x & MP-124
Interface Name
ID
1 ManagementIF
200 myControlIF
211 myMediaIF
Interface
Name
1 -
Document #: LTRT-65432