Quitting Scenario Mode - AudioCodes MP-11x User Manual

User's Manual
4. Click OK; the Scenario is deleted and the Scenario mode closes.
Note:
•
Loading an empty dat file (see 'Loading a Scenario to the Device' on page 57).
•
Loading an ini file with the ScenarioFileName parameter set to no value (i.e.,
ScenarioFileName = "").
4.1.8.7

Quitting Scenario Mode

Follow the procedure below to quit the Scenario mode.

To quit the Scenario mode:
1. On the Navigation bar, click any tab except the Scenarios tab, or click the Cancel
Scenarios button located at the bottom of the Navigation tree; a message box
appears, requesting you to confirm exiting Scenario mode, as shown below.
Figure 4-21: Confirmation Message Box for Exiting Scenario Mode
2. Click OK to exit.
Version 6.6
You can also delete a Scenario using the following alternative methods:
59
4. Web-Based Management
MP-11x & MP-124