AudioCodes MP-11x User Manual page 633

User's Manual
Parameter
EMS: Perform Additional
IP2TEL Destination
Manipulation
[PerformAdditionalIP2TELDes
tinationManipulation]
Destination Phone Number Manipulation for Tel-to-IP Calls Table
Web: Destination Phone
Number Manipulation Table for
Tel > IP Calls
EMS: SIP Manipulations >
Destination Telcom to IPs
[NumberMapTel2IP]
Source Phone Number Manipulation for IP-to-Tel Calls Table
Web: Source Phone Number
Manipulation Table for IP > Tel
Calls
EMS: SIP Manipulations >
Source IP to Telcom
[SourceNumberMapIP2Tel]
Version 6.6
NumberMapIp2Tel_RemoveFromLeft,
NumberMapIp2Tel_RemoveFromRight,
NumberMapIp2Tel_LeaveFromRight,
NumberMapIp2Tel_Prefix2Add, NumberMapIp2Tel_Suffix2Add,
NumberMapIp2Tel_IsPresentationRestricted;
[\NumberMapIp2Tel]
For example:
NumberMapIp2Tel 0 = 03,22,$$,$$,$$,2,667,$$,$$;
Note: For a detailed description of this table, see 'Configuring
Source/Destination Number Manipulation' on page 241.
Enables additional destination number manipulation for IP-to-Tel
calls. The additional manipulation is done on the initially
manipulated destination number, and this additional rule is also
configured in the manipulation table (NumberMapIP2Tel
parameter). This enables you to configure only a few manipulation
rules for complex number manipulation requirements (that
generally require many rules).

[0] = Disable (default)

[1] = Enable
This table parameter manipulates the destination number of Tel-to-
IP calls. The format of this parameter is as follows:
[NumberMapTel2Ip]
FORMAT NumberMapTel2Ip_Index =
NumberMapTel2Ip_DestinationPrefix,
NumberMapTel2Ip_SourcePrefix,
NumberMapTel2Ip_SourceAddress,
NumberMapTel2Ip_NumberType, NumberMapTel2Ip_NumberPlan,
NumberMapTel2Ip_RemoveFromLeft,
NumberMapTel2Ip_RemoveFromRight,
NumberMapTel2Ip_LeaveFromRight,
NumberMapTel2Ip_Prefix2Add, NumberMapTel2Ip_Suffix2Add,
NumberMapTel2Ip_IsPresentationRestricted,
NumberMapTel2Ip_SrcTrunkGroupID, NumberMapTel2Ip_
SrcIPGroupID;
[\NumberMapTel2Ip]
For example:
NumberMapTel2Ip 0 = 01,$$,*,0,0,2,$$,$$,971,$$,$$,$$,$$;
NumberMapTel2Ip 1 = 10,10,*,255,255,3,0,5,100,$$,255,$$,$$;
Note: For a detailed description of this table, see 'Configuring
Source/Destination Number Manipulation' on page 241.
This parameter table manipulates the source number for IP-to-Tel
calls. The format of this parameter is as follows:
[SourceNumberMapIp2Tel]
FORMAT SourceNumberMapIp2Tel_Index =
SourceNumberMapIp2Tel_DestinationPrefix,
SourceNumberMapIp2Tel_SourcePrefix,
SourceNumberMapIp2Tel_SourceAddress,
SourceNumberMapIp2Tel_NumberType,
SourceNumberMapIp2Tel_NumberPlan,
SourceNumberMapIp2Tel_RemoveFromLeft,
633
44. Configuration Parameters Reference
Description
MP-11x & MP-124