Configuring Tr-069 - AudioCodes MP-11x User Manual

User's Manual
♦
♦
♦
•
InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.SIP: Configures
SIP parameters specific to the UA such as Proxy server.
•
InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.RTP: Configures
various RTP parameters for the FXS lines such as RTCP and SRTP.
9.3

Configuring TR-069

The CWMP/TR-069 Settings page is used to enable and configure TR-069.

To configure TR-069:
1. Open the CWMP/TR-069 Settings page (Configuration tab > System menu >
Management > CWMP).
2. Configure the parameters as required. For a description of the TR-069 parameters,
see ''TR-069 Parameters'' on page 493.
3. Click Submit.
4. Reset the device with a burn-to-flash memory for the settings to take effect.
Version 6.6
InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.{i}.Code
c.List.{i}: Configures voice coder used by specific FXS line.
InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.{i}.Callin
gFeatures: Configures voice parameters per FXS line such as caller ID.
InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.{i}.SIP:
Configures username/password per FXS line. AudioCodes maps this object
to the corresponding entry in the Authentication table
Figure 9-5: CWMP/TR-069 Settings Page
107
9. TR-069 Based Management
MP-11x & MP-124