f.
In the first 'Proxy Address' field, enter the IP address and port of the device (in
the format x.x.x.x:port). This is the port as defined in the 'SAS Local
UDP/TCP/TLS Port' field (see 'Configuring Common SAS Parameters' on page
337).
Figure 28-4: Defining Proxy Server for Gateway Application
g.
Click Submit.
2.
Disable use of user=phone in SIP URL:
a.
Open the SIP General Parameters page (Configuration tab > VoIP menu > SIP
Definitions submenu > General Parameters).
User's Manual
342
MP-11x & MP-124
Document #: LTRT-65432