AudioCodes MP-11x User Manual page 33

User's Manual
6. To change the Default Gateway IP address:
a. Press 3 followed by the # key; the current Default Gateway address is played.
b. Press the # key.
c. Dial the new Default Gateway address (e.g., 192*168*0*1), and then press # to
finish.
d. Review the new Default Gateway address, and then press 1 to save.
7. Hang up (on-hook) the handset.
Alternatively, initial configuration may be performed using an HTTP server. The Voice
Menu may be used to specify the configuration URL.

To set a configuration URL:
1. Obtain the IP address of the configuration HTTP server (e.g., 36.44.0.6).
2. Connect a telephone to one of the FXS ports.
3. Lift the handset and dial ***12345 (three stars followed by the digits 1, 2, 3, 4, and 5).
4. Wait for the "configuration menu" voice prompt to be played.
5. Dial 31 followed by the # key; the current IP address is played.
6. To change the IP address:
a. Press the # key.
b. Dial the configuration server's IP address. Use the star (*) key instead of dots
("."), e.g., 36*44*0*6, and then press # to finish.
c. Review the configuration server's IP address, and then press 1 to save.
7. Dial 32 followed by the # key, and then do the following to change the configuration
file name pattern:
a. Press the # key.
b. Select one of the patterns listed in the table below (aa.bb.cc.dd denotes the IP
address of the configuration server):
# Configuration File Name Pattern
1 http://aa.bb.cc.dd/config.ini
2 https://aa.bb.cc.dd/config.ini
3 http://aa.bb.cc.dd/audiocodes/<MAC>.ini
4 http://aa.bb.cc.dd:8080/config.ini
5 http://aa.bb.cc.dd:1400/config.ini
http://aa.bb.cc.dd/cgi-
6
bin/acconfig.cgi?mac=<MAC>&ip=<IP>
a. Press the selected pattern code, and then press # to finish.
8. Press 1 to save, and then hang up the handset. The device retrieves the configuration
from the HTTP server.
The following is an example perl CGI script, suitable for most Apache-based HTTP servers
for generating configuration dynamically per pattern #6 above. Copy this script to
/var/www/cgi-bin/acconfig.cgi on your Apache server and edit it as required:
#!/usr/bin/perl
use CGI;
Version 6.6
2. Assigning the OAMP IP Address
Description
Standard config.ini.
Secure HTTP.
The device's MAC address is appended to the file
name (e.g.,
http://36.44.0.6/audiocodes/00908f012300.ini).
HTTP on port 8080.
HTTP on port 1400.
Generating configuration per IP/MAC address
dynamically, using a CGI script. See perl example
below.
33 MP-11x & MP-124