Toolbar Description - AudioCodes MP-11x User Manual

4.1.4

Toolbar Description

The toolbar provides frequently required command buttons, described in the table below:
Icon Button
Name
Submit
Device
Actions
Home
Log off
Note: If you modify a parameter that takes effect only after a device reset, after you
click the Submit button in the configuration page, the toolbar displays "Reset", as
shown in the figure below. This is a reminder that you need to later save your settings
to flash memory and reset the device.
User's Manual
Table 4-2: Description of Toolbar Buttons
Applies parameter settings to the device (see 'Saving Configuration'
on page 366).
Note: This icon is grayed out when not applicable to the currently
opened page.
Burn Saves parameter settings to flash memory (see 'Saving
Configuration' on page 366).
Opens a drop-down list with frequently needed commands:

Load Configuration File: Opens the Configuration File page for
loading an ini file to the device (see 'Backing Up and Loading
Configuration File' on page 388).

Save Configuration File: Opens the Configuration File page for
saving the ini file to a folder on a computer (see 'Backing Up and
Loading Configuration File' on page 388).

Reset: Opens the Maintenance Actions page for performing
various maintenance procedures such as resetting the device
(see 'Resetting the Device' on page 363).

Software Upgrade Wizard: starts the Software Upgrade wizard
for upgrading the device's software (see 'Software Upgrade
Wizard' on page 385).
Opens the Home page (see 'Viewing the Home Page' on page 63).
Help Opens the Online Help topic of the currently opened configuration
page (see 'Getting Help' on page 61).
Logs off a session with the Web interface (see 'Logging Off the Web
Interface' on page 62).
Figure 4-3: "Reset" Displayed on Toolbar
Description
42
MP-11x & MP-124
Document #: LTRT-65432