AudioCodes MP-11x User Manual page 564

Parameter
Web: RTCP XR Report Mode
EMS: Report Mode
[RTCPXRReportMode]
publication-ip-group-id
[PublicationIPGroupID]
User's Manual
Enables the device to send RTCP XR in SIP PUBLISH
messages to the Event State Compositor (ESC) server and
defines the interval at which they are sent.

[0] Disable = (Default) RTCP XR is not sent.

[1] End Call = RTCP XR is sent at the end of the call.

[2] End Call & Periodic = RTCP XR is sent at the end of
the call and periodically according to the RTCPInterval
parameter.

[3] End Call & End Segment = RTCP XR is sent at the
end of the call and at the end of each media segment of
the call. A media segment is a change in media, for
example, when the coder is changed or when the caller
toggles between two called parties (using call
hold/retrieve). The RTCP XR sent at the end of a media
segment contains information only of that segment. If the
segment does not contain RTP/RTCP content, the RTCP
XR is not sent. For call hold, the device sends an RTCP
XR each time the call is placed on hold and each time it
is retrieved. In addition, the Start timestamp in the RTCP
XR indicates the start of the media segment; the End
timestamp indicates the time of the last sent periodic
RTCP XR (typically, up to 5 seconds before reported
segment ends).
Defines the IP Group to where the RTCP XR is sent. If the
value is -1 (default) or 0, the RTCP XR is sent to the ESC
server, as configured by the RTCPXREscIP parameter.
Note: The parameter is applicable only to the Gateway
application.
564
MP-11x & MP-124
Description
Document #: LTRT-65432