AudioCodes MP-11x User Manual page 516

Parameter
Web: RADIUS Authentication
Server IP Address
EMS: RADIUS Auth Server IP
[RADIUSAuthServerIP]
Web: RADIUS Authentication
Server Port
EMS: RADIUS Auth Server Port
[RADIUSAuthPort]
Web: RADIUS Shared Secret
EMS: RADIUS Auth Server
Secret
[SharedSecret]
RADIUS Authentication Parameters
Web: Default Access Level
[DefaultAccessLevel]
Web: Behavior upon
Authentication Server Timeout
[MgmtBehaviorOnTimeout]
Web: Local RADIUS Password
Cache Mode
[RadiusLocalCacheMode]
Web: Local RADIUS Password
Cache Timeout
[RadiusLocalCacheTimeout]
Web: RADIUS VSA Vendor ID
[RadiusVSAVendorID]
Web: RADIUS VSA Access
Level Attribute
[RadiusVSAAccessAttribute]
User's Manual
Web User Accounts' on page 66).
Defines the IP address of the RADIUS authentication server.
Note: For this parameter to take effect, a device reset is required.
Defines the port of the RADIUS Authentication Server.
Note: For this parameter to take effect, a device reset is required.
Defines the 'Secret' used to authenticate the device to the
RADIUS server. This should be a cryptically strong password.
Defines the default access level for the device when the RADIUS
(authentication) response doesn't include an access level
attribute.
The valid range is 0 to 255. The default is 200 (i.e., Security
Administrator).
= Defines the mode of operation regarding user login
authentication if connection with the LDAP server fails (due to a
timeout, temporary network malfunction or AD server problem).

[0] Deny Access

[1] Verify Access Locally = (Default) Device verifies the user's
credentials (username/password) locally in its user database
and grants access if correct; otherwise, it denies access.
Determines the device's mode of operation regarding the timer
(configured by the parameter RadiusLocalCacheTimeout) that
determines the validity of the user name and password (verified by
the RADIUS server).

[0] Absolute Expiry Timer = When you access a Web page, the
timeout doesn't reset, instead it continues decreasing.

[1] Reset Timer Upon Access = (Default) Upon each access to
a Web page, the timeout always resets (reverts to the initial
value configured by RadiusLocalCacheTimeout).
Defines the time (in seconds) the locally stored user name and
password (verified by the RADIUS server) are valid. When this
time expires, the user name and password become invalid and a
must be re-verified with the RADIUS server.
The valid range is 1 to 0xFFFFFF. The default is 300 (5 minutes).

[-1] = Never expires.

[0] = Each request requires RADIUS authentication.
Defines the vendor ID that the device accepts when parsing a
RADIUS response packet.
The valid range is 0 to 0xFFFFFFFF. The default is 5003.
Defines the code that indicates the access level attribute in the
Vendor Specific Attributes (VSA) section of the received RADIUS
packet.
The valid range is 0 to 255. The default is 35.
516
MP-11x & MP-124
Description
Document #: LTRT-65432