Table of Contents
Advertisement
2. Getting Started with Initial Connectivity
3.
In the 'Username' and 'Password' fields, enter the case-sensitive, default login username
(Admin) and password (Admin).
4.
Click Log In.
2.2
Configuring WAN Interface for Voice Gateway
This section describes how to configure the device's WAN interface using Gigabit Ethernet
(
GigabitEthernet
network.
Before configuring the WAN interface, make sure that you have all the required
information from your Internet Telephony Service Provider (ITSP).
To configure a WAN IP address:
1.
Connect the WAN port to the WAN network. For information on cabling the WAN port,
refer to the
2.
Open the WAN Interface page (Setup menu > Ip Network tab > Core Entities folder > WAN
Interface).
3.
On this page, you can configure:
•
WAN (static or DHCP client - Default WAN interface is DHCP Client)
•
DNS (static or Auto - Default DNS settings is Auto)
0/0), which is the main interface for connecting the device to the voice
Hardware Installation
Manual.
- 6 -
MP-5xx Analog VoIP Gateway
Advertisement
Table of Contents
