Configuring The Device Via Tr-069 And Tr-104; Table 13-6: Internetgatewaydevice.wandevice.i.wanconnectiondevice.i.wanipconnection.i - AudioCodes MP-26 series User Manual

13.4.2.1 Configuring the Device via TR-069 and TR-104

TR-069 allows basic configuration of the device. The configuration is defined in a
hierarchical tree-like structure according to the TR-069 standard.
13.4.2.1.1 Configuring the WAN Interface

Table 13-6: InternetGatewayDevice.WANDevice.i.WANConnectionDevice.i.WANIPConnection.i

TR-069/TR-104
Parameter
AddressingType
ConnectionStatus
ConnectionType
DefaultGateway
DNSEnabled
DNSOverrideAllowed
DNSServers
Enable
ExternalIPAddress
User's Manual
Configuration File
Parameter
mt_cwmp_param_wan_con
n_ip_addressing_type_get/
set
mt_cwmp_param_wan_con
n_ip_status_get
mt_cwmp_param_wan_con
n_ppp_type_get
mt_cwmp_param_wan_con
n_ip_default_gateway_get/
set
mt_cwmp_param_wan_con
n_ip_dns_enabled_get/set
mt_cwmp_param_wan_con
n_ip_dnsoverrideallowed_
get/set
mt_cwmp_param_wan_con
n_xxx_dnsservers_get/set(
i)
mt_cwmp_param_wan_con
n_xxx_enable_get/set(1)
mt_cwmp_param_wan_con
n_xxx_externalip_get(i)
238
MP-26x/MP-27x Multimedia Home Gateway
Description
The method used to assign an address to the
WAN side interface of the CPE for this
connection:

"DHCP"

"Static"
Current status of the connection:

"Unconfigured"

"Connecting"

"Connected"

"PendingDisconnect"

"Disconneting"

"Disconnected"
Specifies the connection type of the
connection instance:

"Unconfigured"

"IP_Routed"

"DHCP_Spoofed"

"PPPoE_Bridged"

"PPPoE_Relay"

"PPTP_Relay"

"L2TP_Relay"
The IP address of the default gateway for this
connection. This parameter is configurable
only if the AddressingType is Static.
Whether or not the device should attempt to
query a DNS server across this connection.
Whether or not a manually set, non-empty
DNS address can be overridden by a DNS
entry received from the WAN.
Comma-separated list of DNS server IP
addresses for this connection. Support for
more than three DNS Servers is optional.
Enables or disables the connection instance.
On creation of a WANIPConnection instance,
it is initially disabled.
The external IP address used by NAT for this
connection. This parameter is configurable
only if the AddressingType is Static.
Document #: LTRT-23510