CHAPTER 4 Configuring VoIP LAN Interface for OAMP
4
Configuring VoIP LAN Interface for OAMP
You can change the device's default OAMP IP address, using any of the following methods:
■
Embedded HTTP/S-based Web server (see
■
Embedded CLI (see
■
ini file (see
Changing OAMP Address through Web Interface
You can change the device's default OAMP networking address through the Web- based
management tool (Web interface). The default IP address is used to initially access the device.
➢
To change the default OAMP network address through Web interface:
1.
Connect Ethernet port 0/1 or 0/2 located on the CPU module directly to the network interface of
your computer, using a straight-through Ethernet cable.
2.
Change the IP settings of your computer to correspond with the default OAMP IP address and
subnet mask of the device.
3.
Access the Web interface:
a.
On your computer, start a Web browser and in the URL address field, enter the default IP
address of the device; the Web interface's Web Login screen appears:
CLI)
Changing OAMP Address through ini File
Mediant 1000 Gateway & E-SBC | User's Manual
Web Interface)
on page 15
- 12 -