Setting The Hook Thread Guide - Dürkopp Adler 1767 Service Instructions Manual

15.3 Setting the hook thread guide

The position of the hook thread guide determines how the thread is wound
onto the winder.
Proper setting
The thread is wound on evenly over the entire width of the bobbin.
Fig. 59: Setting the hook thread guide
(1) - Screw
To set the hook thread guide:
1. Loosen the screw (1).
2. Turn the hook thread guide (2):
74
①
②
• To the front: The thread will be wound on further to the front
• To the rear: The thread will be wound on further to the rear
(2) - Hook thread guide
Service Instructions 1767 - 00.0 - 12/2016
Winder