Removing And Fitting The Head Cover; Removing And Fitting The Valve Cover - Dürkopp Adler 567 CLASSIC Service Manual

3.3.3 Removing and fitting the head cover

Fig. 3: Removing and fitting the head cover
Removing the head cover
1. Loosen the screws (1).
2. Remove the head cover (2).
Fitting the head cover
1. Fit the head cover (2).
2. Tighten the screws (1).

3.3.4 Removing and fitting the valve cover

Fig. 4: Removing and fitting the valve cover
Removing the valve cover
1. Undo all four screws (1).
2. Remove the valve cover (2).
Fitting the valve cover
1. Fit the valve cover (2).
2. Tighten all four screws (1).
12
①
(1) - Screws
①
(1) - Screws
(2) - Head cover
(2) - Valve cover
Service manual 567 classic - 01.0 - 10/2015
Working basis
②
②