Removing And Fitting The Valve Cover - Dürkopp Adler M-TYPE H867 Service Manual

Fitting the head cover
1. Fit the head cover (2).
2. Screw the head cover screws (1) firmly in place.

4.4.4 Removing and fitting the valve cover

Figure 4: Removing and fitting the valve cover
(1) - Valve cover screws
Removing the valve cover
1. Loosen all four valve cover screws (1).
2. Remove the valve cover (2).
Fitting the valve cover
1. Fit the valve cover (2).
2. Screw all four valve cover screws (1) firmly in place.
12
Important: When removing the valve cover, be sure not to pull off any
cables.
Important: When fitting the valve cover, be sure not to trap any cables.
(2) - Valve cover
Service manual H867 Version 00.0 - 08/2013
Working basis