List Of Menu And Submenu Items - Dürkopp Adler 559 Operating Instructions Manual

10.4.3 List of menu and submenu items

Menu item Description
100 Buttonhole number: up to 5 different buttonholes can be programmed.
110 Taper tack selection: buttonholes with taper tack (1), cross tack (2), round tack (3),
and without taper tack (0) can be programmed.
120 Length adjustments
121 Sewing length: the sewing length can be set from 6 to 42 mm, depending
on the equipment.
121 Eyelet diameter: the internal diameter of the eyelet, depending on the
equipment adjustable between 2-7.5 mm.
122 Stitch length in the lip: distance from stitch to stitch within the lip (from 0.5 to 2 mm).
122 Number of stitches in the eyelet*: number of the uniformly divided stitches in the
entire eyelet.
123 Thread trimming length: it is possible to alter the length of the needle thread on
the underside of the buttonhole.
Condensed stitches increase the sewing security at the seam beginning and seam end.
124 Length of the condensed stitches at the seam beginning: distance between the
stitches within the stitch condensation at the seam beginning.
125 Length of the condensed stitches at the seam end: distance between the
stitches within the stitch condensation at the seam beginning.
126 Number of condensed stitches at the seam beginning: stitch number inside the
stitch condensation at the seam beginning.
127 Number of condensed stitches at the seam end: stitch number inside the
stitch condensation at the seam end.
128 Eyelet overlap*: overlapping of the seam beginning and the seam end.
130 Needle thread tension
131 Sewing tension: sewing tension electronically regulated within the sewing cycle.
132 Trimming tension: lowered needle thread tension for the needle thread trimmer
133 Tension at the sewing start: the length of the starting thread can be adjusted by
changing the thread tension at the seam beginning.
140 Eyelet adjustments
141 Eyelet type: up to 6 different eyelet types can be programmed.
No.
0
1
2
3
4
5
142 Number of stitches in the eyelet: from 4 to 25 stitches can be set in the circle
of the buttonhole eye.
24
Knife Shape Buttonhole shape for
cut after sewing/
no cut
(X x Y) (X x Y)
0,0x0,0
1,3x3,0
2,1x3,2
2,8x4,3
3,0x4,6
3,2x5,4
Buttonhole shape for
cut before sewing
(X x Y)
0,0x0,0
1,6x3,5
2,4x3,9
3,3x4,6
3,6x4,8
3,6x6,1
0,0x0,0
1,1x2,6
1,7x2,8
2,4x3,9
2,6x4,1
2,8x4,7
* only for eyelets