Fonts; Tp/Apt Settings; Task Settings - LXNAV LX Zeus Mobile User Manual

2.1.10.1.3 Map Orientation
The map orientation of LX Zeus can be used in three different ways as follows:
North up (North is always on the top of the screen)
Track up (The glider always points to the top of the screen)
Combination of track up and north up regarding to flight status (circling, straight flight)
2.1.10.1.4 "Flarm" distance circles
In this section it is possible to select number, size and colour of distance circles on the map.
2.1.10.2

Fonts

Users can define font size for cities on the map. Default
size is 14 px. Font size can be selected between 10 and
24 px.
2.1.10.3

TP/APT settings

In this menu you can adjust appearance and length of
labels of TP and APT on the map at different zooms.
Show TP/APT till zoom (adjust visibility of
TP/APT at wanted size ratio)
Show TP labels till zoom (adjust visibility of
TP labels at wanted size ratio)
TP labels length (adjust number of label
characters shown on the map)
Show APT labels till zoom (adjust visibility of
APT labels at wanted size ratio)
APT labels length (adjust number of label
characters shown on the map, ICAO code can
be also selected)
2.1.10.4

Task settings

Start lines/zones, turnpoint zones and finish lines/zones
can be given different default colours from a large
palette. It's also possible to change their outlines and fills.
There is a different colour possible for active or inactive
zones.
LX Zeus v 3.0 25.6.2014
- 27 -