Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

4.4 Device Range that Can Be Set

The device ranges of controller that can be used for GOT
are as follows.
Note that the device ranges in the following tables are the
maximum values that can be set in GT Designer3.
The device specifications of controllers may differ
depending on the models, even though belonging to the
same series.
Please make the setting according to the specifications of
the controller actually used.
When a non-existent device or a device number outside
the range is set, other objects with correct device settings
may not be monitored.

Setting item
(1) For FUJI MICREX-F
Item
Set the device name, device number, and bit number.
The bit number can be set only when specifying the bit of
Device
word device.
The uppermost bit is b0 and the lowermost bit is b15.
Displays the device type and setting range which are
Information
selected in [Device].
Set the monitor target of the set device.
Network
Station Select this item when monitoring the PLC of
No. the specified station No.
Information
(2) FUJI MICREX-SX SPH
Item
Set the device name, device number, and bit number.
The bit number can be set only when specifying the bit of
Device
word device.
The uppermost bit is b0 and the lowermost bit is b15.
Displays the device type and setting range which are
Information
selected in [Device].
Set the monitor target of the set device.
CPU
Set the CPU No. of the controller.
No.
Host Select this item for monitoring the host PLC.
Network
Select this for monitoring other PLCs.
After selecting, set the station number of the
Other PLC to be monitored.
NW No.: Set the network No.
Station No.: Set the station No.
POINT POINT POINT
Device settings of FUJI FA PLC
(1) When setting a bit device
Set the device using the format of word number
(DEC) + bit No. (0 to F (HEX)).
Device name
(2) When setting a word device
For direct access (W24) and user file (W30 to
W109, W9), set as follows.
Device name
4. CONNECTION TO FUJI PLC
4.4 Device Range that Can Be Set
Description
Bit No.(HEX)
Word No.(DEC)
Word number
File number
4 - 27
4