Plc Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

6.2.9

PLC Side Settings

POINT POINT POINT
YASKAWA PLC
For details of YASKAWA PLCs, refer to the following
manuals.
YASKAWA PLC user's Manual

Communication and port settings
Make the communication and port settings with a
peripheral tool.
Device name
*1
Address
Protocol
Mode
Transmission
4800bps, 9600bps, 19200bps, 38400bps,
*2*3 57600bps
speed
Data bit
Stop bit
Parity bit
Error check
*1 Set the address according to the Host Address setting on the
GOT side.
For the Host Address setting on the GOT side, refer to the
following.
6.2.8 ■ Communication detail settings
*2 Only transmission speeds available on the GOT side are
shown.
Also, the setting range differs depending on the YASKAWA
PLC model.
*3 The transmission speed setting must be consistent with that
of the GOT side.
For the transmission speed setting on the GOT side, refer to
the following.
6.2.8 ■ Communication detail settings
Set value
1 to 31
MEMOBUS
RTU
8bits
1bit
Even
CRC16
6. CONNECTION TO YASKAWA PLC
6.2 Serial Connection
6
6 - 17