Fuji Pxr/Pxg/Pxh; Precautions - Mitsubishi Electric GOT2000 Series Connection Manual

5.6.1

FUJI PXR/PXG/PXH

Device name
Bit data (0)
*1
Bit data (1)
The bit specification of the word device
*1
Word data (3)
Word data (4)
*1 Only reading is possible.

5.7 Precautions


Station number settings of temperature controller
In the system configuration, the temperature controller with the station number set with the host address must be
included. For details of host address setting, refer to the following.

FIX processing of temperature controller
The temperature controller power must not be turned off during the FIX processing. Otherwise, data within the non-
volatile memory will corrupt and the temperature controller will be unavailable.

GOT clock control
Since the temperature controller does not have a clock function, the settings of "time adjusting" or "time broad cast"
by GOT clock control will be disabled.

Disconnecting some of multiple connected equipment
The GOT can disconnect some of multiple connected equipment by setting GOT internal device. For example, the
faulty station where a communication timeout error occurs can be disconnected from connected equipment.
For details of GOT internal device setting, refer to the following manual.
5 - 20
5. CONNECTION TO FUJI TEMPERATURE CONTROLLER

5.7 Precautions

5.4.2 Communication detail settings
GT Designer3 (GOT2000) Help
Setting range
00001 to 00001
10001 to 10016
Setting range of each word device
30001 to 31398
40001 to 43776
Device No. representation
Decimal
―
Decimal