4.2.8
Station number setting
Set each station number so that no station number
overlaps.
The station number can be set without regard to the cable
connection order. There is no problem even if station
numbers are not consecutive.
Station
Station
No.3
No.0
GOT
Examples of station number setting
(1) Direct specification
Specify the station No. of the PLC to be changed when
setting device.
Specification range
0 to 99
4 - 22
4. CONNECTION TO FUJI PLC
4.2 Serial connection
Station
Station
Station
No.1
No.15
No.6